|
-
STABILIZERS
“Installation of stabilizers on vessels requires a high level of expertise. The process requires cutting a sizable hole on both sides of the hull at a location that will maximize the stabilization of the vessel. A proper evaluation of the type of hull construction, bracing, and material must be weighed against the size and weight of the new stabilizer.
Hull-Tech expertise is backed up by over twenty-five years experience in not only installing bow thrusters and stabilizers but also major customization such as extending or reducing the length of the vessel's hull.
Call Hull-Tech for a free consultation and free estimate.”
|
- Fiberglass Repairs and Insurance Repair:
We provide a wide variety of marine services including major/minor repairs and custom fabrication. Our expertise in fiberglass repair is well known by boat insurance adjusters and boat owners.
In addition to fiberglass repair and custom fabrication we specialize in insurance repair. If requested, we will communicate directly with your insurance company to ensure they understand the scope of the work necessary to complete the job to your satisfaction.
In addition, our expertise involves experience in extending or reducing the length of vessels plus modification to decks and cockpits. This of course, involves a high degree of knowledge and experience that Hull-Tech provides.
Our normal service area encompasses the southwest coast of California, however, past projects have included major repairs to vessels throughout the west coast of the United States.
|
- Gelcoat Repairs:
The next time you are cleaning or waxing your boat, take the time to look for small cracks, scratches, and chips in the gelcoat. If your boat is more than a few years old, you'll probably be surprised at the number you find.
If cracks appear at important joints or intersections in the cabin or deck, they might be a sign of an underlying structural weakness that needs to be examined. Consider calling Hull-Tech.
At Hull-Tech, we are dedicated to customer satisfaction.
|
- Painting:
Hull-Tech has full service customized paint systems for your boat starting with careful preparation of the substrata and proceeding through the priming and final application of the finished coating.
Hull-Tech technicians are diligent in their attention to detail, which results in the highest level of professional finishes. In addition, we can assist you in selecting the most pleasing aesthetics in color and striping combinations.
|
 - Teak Deck Repair:
TEAK DECK REPAIR
Hull-Tech is the expert on repair and refurbishing of Teak decks. If you deck is rough, discolored, pulling away from the Caulking, or leaking, our professional team can repair it and save you thousands of dollars. Most teak decks can be repaired to avoid the necessity to replace.
Again, call Hull-Tech first. We will evaluate the deck, consult, and provide an estimate FREE.
|
-
DELAMINATION
This yacht is affected by delamination due to water absorption into the FRP laminate. (Note large blisters on surface of gelcoat)
DELAMINATION in fiberglass and composite boats is a serious problem not easily detected in the early stages. The first sign may be blisters on the gelcoat surface indicating water trapped in the laminate or areas bulging off the surrounding laminate. The result of this problem is the separation of one laminate of fiberglass from the next resulting in a substantial loss in structural strength and seaworthiness.
Hull- Tech has years of experience on hundreds of vessels and is well equipped to restore the safety and seaworthiness of your vessel. If your vessel has a wet core or damaged core, Hull-Tech can fix all of these problems, GUARANTEED, Call for a free consultation and estimate.
|
Call Today!
If you suspect you may have blister problems, call us today to discuss your boats particular problems and get the facts. You’ll be glad to know that no other boat yard can match our prices, quality, and the warranty to back it up. In San Diego call (619) 298-7853, or call our toll-free at (800) 488-9639
|
|
